Fusionpbx出現500 Internal Server Error

fusionpbxIn a recent trial Freeswitch this powerful PBX software,After some time trial,Wondering if there is subsequent maintenance GUI interface,Should be relatively easy to manage,And then they find on FusionPBX。

 

  在裝好AppServ跟FusionPBX後,開啟網頁卻出現"500 Internal Server Error",起初也摸不著頭緒,乾脆改用官網wiki提到的WAMP架,結果問題依舊,依照頁面建議去查error log後,看到"rewrite"這個關鍵字,隨即想到之前在架Joomla時,如果要啟用rewrite模組,需要把根目錄的htaccess.txt更名為.htaccess,而先前有留意到FusionPBX的根目錄也有一個.htaccess,反推後就猜想會不會是rewrite模組沒啟用的關係導致,於是去httpd.conf把rewrite_module給啟用(拿掉前面的#)Later,Finally see the correct picture。

[Links]

Leave a Comment

Please note: Comment moderation is enabled and may delay your comment. There is no need to resubmit your comment.