Old Sen's Tales IT Help

CISCO(Linksys) SGE2010 LAG設定筆記：

1. Bridging -> VLAN Management -> Interface Settings -> LAGs，Change the target LAG(such as LAG1)Interface VLAN Mode from Access to Trunk。
   
2. Bridging -> VLAN Management -> VLAN to Port，Confirm that each target port(such as g43、g44)is set to the default VLAN1(Otherwise, the next step will fail)。
   
3. Bridging -> Port Management -> LAG Management，Add g43、g44 to LAG1，and select LACP(Because multiple ports are set as Trunk，If not selected，the network will not work)。
   

Tips.

• Step 2. Each port Mode can be either Access or Trunk。